| Number
of E1 Interfaces |
One |
| Conformity |
G.703 |
| Frame
Structure |
As per
ITU-T (CCITT) G.704 |
| Signaling |
PRI ISDN
(Euro ISDN) Q.931 and R2 Digital - Channel Associated Signaling (R2 Generic) in accordance
with ITU-T Q.421, and ITU-T Q.422 Complies to both ITU-T Q.421, and ITU-T Q.422 |
| PCM
Sampling Rate |
8000
samples / second. |
| Encoding
Law |
A Law |
| Bit Rate |
2048Kbps
50ppm. |
| Code |
HDB3 |
| Nominal
Impedance |
120 Ohms
Standard
(75 Ohms Optional) |
| Connector |
RJ45
(120 Ohms Impedance) |
Peak
Voltage of a mark
For 120 Ohms Balanced Interface |
3.0 Volt 0.3 Volt. |
| Pulse
Mask |
As per
ITU-T (CCITT) Rec. G.703 |
| Output
Jitter |
<0.05UI
(in the frequency range of 20Hz to 100KHz). |
| Permissible
Attenuation |
6dB at
1MHz |
Return
Loss at:
51.2 KHz to 102.4 KHz.
102.4 KHz to 2048 KHz
2048 KHz to 3072 KHz |
> 12dB
> 18dB
> 14dB |
| Jitter
Tolerance |
As per
ITU-T (CCITT) G.823 |
| Loss and
Recovery of Frame Alignment |
As per
Clause 3 of ITU-T (CCITT) G.732 |
| Loss and
Recovery of Multi-Frame Alignment |
As per
Clause 5.2 of ITU-T (CCITT) G.732 |
| Number of GSM
Interfaces |
1 ~ 30 (Stackable, 1
thru 30). |
| Type |
Dual Band EGSM 900
MHz and EGSM 1800 MHz.
Dual Band EGSM 900 MHz and EGSM 1900 MHz. |
| Compliance |
Compliant with ETSI
GSM
Phase 2+ standard (Normal MS)
Class 4 (2W @ 900MHz)
Class 1 (1W @ 1800MHz) |
| Approvals |
Fully Type Approved
to GSM Standards |
| SIM Interface
Internal Tray |
Toolkit Class 2. 3V
Reader |
| Voice Features |
Full Rate, Enhanced
Full Rate And Half-Rate (FR/EFR/HR) |
| DTMF |
Dual Tone Multi
FrequencyFunction (DTMF)
Dialing Support |
| Number of Interfaces |
2,
1 - Input (RJ-45)
1 - Output (RJ-45) |
| Conformity |
G.703 |
| Frame Structure |
As per ITU (CCITT)
G.704 |
| Signaling |
Pass-Through |
| PCM Sampling Rate |
8000 Samples / sec |
| Encoding Law |
A Law as per ITU
(CCITT) G.711 |
| Bit Rate |
2048 Kbps ± 50 ppm |
| Code |
HDB3 |
| Nominal Impedance |
120 W balanced |
Peak Voltage of a
mark
For 120 W balanced interface |
3.0 V ± 0.3 V |
Peak Voltage of a
space
For 120 W balanced interface |
0 V ± 0.3 V |
| Nominal Pulse Width |
244 ns |
| Pulse Mask |
as per ITU (CCITT)
Rec. G.703 |
| Output Jitter |
< 0.05 UI (in the
frequency range of 20Hz to 100 Khz) |
| Permissible
Attenuation |
6 dB at 1 MHz |
Return Loss at:
51.2 KHz to 102.4 Khz
102.4 KHz to 2048KHz
2048KHz to 3072 Khz |
> 12dB
> 18dB
> 14dB |
| Jitter Tolerance |
As per ITU (CCITT)
G.823 |
| Loss and recovery of
frame alignment |
As per clause 3 of
ITU (CCITT) G.732 |
| Loss and recovery of
multiframe alignment |
As per clause 5.2 of
ITU (CCITT) G.732 |
