|
|
 |
|

|
|
DS3 to E1 (E1 to DS3) Converters
Valiant offers its DS3 to E1 converters
which is primarily used to establish communication between two DS3 interfaces over an E1
network, or to connect a DS3 network to an E1 network. Valiant converter solutions provides upto from 8 E1 to 32 E1 interface
to one DS3 interface and DS3 to upto 32 E1s. These converters may be installed in a 19
inch VCL-MegaConnect chassis in any "mix" for converting "n" x E1
interfaces to DS3 interfaces. (Note: The value of "n" is in multiples of 8 E1
ports). The converter provides a simple and cost effective method to convert a DS3 stream
to an E1 stream.
The converter provides redundant power supply and mounts in
a 19-inch 6U shelf. The converter may be accessed by the user for configuration and
monitoring through a Windows based GUI that is shipped with the system. It may be also
accessed remotely over a TCP-IP network.
|
|
|
|
|
|

| E1 Interface - Technical Specifications |
| Line Rate |
E1 (2.048Mbps ± 50
bps) |
| Line Code |
HDB3 |
| Available Time Slots |
1 - 31 Data or 1 -
30 Voice |
| Voice Coding |
A Law |
| Signaling |
ITU-T, Q.421 and
Q.422 |
| Framing |
G.704 |
| Clock |
Internal, Loop timed |
| Electrical |
G.703 |
| Jitter |
G.823 |
| Impedance |
120 Ohms |
| Connectors |
RJ-45 Female or Wire
Wrap (both options available) |
| DS3
Interface |
| Number of DS3 Interfaces: |
1 |
| Bit Rate |
44.736 Mbps |
| Bit Rate Tolerance |
+/- 20ppm |
| Line Code |
B3ZS |
| Framing |
* Meets ANSI T1.404
* M13 or C-bit parity |
| Pulse
|
Shape Meets ANSI T1.102-1993
and
Bellcore GR-499-CORE |
Signal Level to clear Loss
of Signal condition |
=
20mV |
Signal Level to clear Loss
of Signal condition |
=90mV
|
| Mechanical Specifications |
| Rack Mounting |
Standard 19-inch DIN
rack |
| Height |
266mm (6U high) |
| Depth |
260mm |
| Width |
477mm |
| Power Supply (with 1+1 Redundant Power Supply) |
| Input DC voltage |
-48V DC ( nominal ) |
| Range of input |
-40V to -60V DC |
| Output voltages |
+5V |
| Input Voltage
Reversal Protection |
Provided in the Card |
| Over Current
Protection |
Provided in the Card |
| Short Circuit
Protection |
Provided in the Card
(recovers automatically) |
| Under Voltage |
< 4.5V |
| Over Voltage |
5.4V to 5.6V |
| Efficiency at full
load |
>80% Typ. |
| Ripple at full load |
<5mVrms |
| Spike at full load |
<50mV |
| Power Consumption |
12W - 8 port, E1 to
DS3 converter configuration
30W - 64 port, E1 to DS3 converter configuration |
| Temperature |
0°C to 55°C |
| Humidity |
95% RH
(non-condensing) |
| Cooling |
Convection Cooling |
|
|
About Us
| Contact Us | Products | Whats
New | Press | E-mail
Please
click here to read our Notices of Copyrights and Trademarks
© Valiant Communications Limited, 1997-2008. All rights
reserved.
E-mail: Contact Us
Web Site: http://www.valiantcom.com |
|