T1 to E3 and E3 to T1 Converters

nav_int_arial_new.gif (2025 bytes)

Related Links

.
T1 to E3 and E3 to T1 Converters

Valiant's T1 to E3 and E3 to T1 converter solutions provides upto from 8 E1 to 48 T1 interface to E3 and E3 to upto 48 T1s. These converters may be installed in a 19 inch VCL-MegaConnect chassis in any "mix" for converting "n" x T1 interfaces to E3 interfaces. (Note: The value of "n" is in multiples of 8 T1 ports). The converter provides a simple and cost effective method to convert a T1 streams to an E3 stream.

The converter provides redundant power supply and mounts in a 19-inch 6U shelf. The converter may be accessed by the user for configuration and monitoring through a Windows based GUI that is shipped with the system. It may be also accessed remotely over a TCP-IP network.

 


T1 to E3 and E3 to T1 converters

 

T1 Interface - Technical Specifications
Line Rate T1 (1.544Mbps ± 50 bps)
Line Code B8ZS, AMI, (selectable)
Available Time Slots 1 - 24
Voice Coding Mu Law
Signaling D4 (Robbed Bit Signaling), E&M Wink Start
Framing D4
Clock Internal, Loop Timed (from E1 clock)
Electrical Meets ITU-T and ANSI T1 recommendations
Jitter ITU-T 1.431
Impedance 100 Ohms
Connectors RJ-45 Female or Wire Wrap (both options available)
E3 Interface - Technical Specifications
 Number of E3 Interfaces:  1
 Bit Rate  34.368 Mbps
 Bit Rate  Tolerance +/- 20ppm
 Line Code  HDB3
 Frame Structure  as per G.751
 Connectors  BNC, Co-axial Un-balanced
 Impedance  75 Ohms
 Permissible Attenuation  12dB @ 17184 KHz
 Signal Level to declare
 Loss of  Signal condition    
 -35dB (maximum)
 Signal Level to clear Loss
 of Signal condition 
 -15dB (minimum)
Mechanical Specifications
Rack Mounting Standard 19-inch DIN rack
Height 266mm (6U high)
Depth 260mm
Width 477mm
Power Supply (with 1+1 Redundant Power Supply)
Input DC voltage -48V DC ( nominal )
Range of input -40V to -60V DC
Output voltages +5V
Input Voltage Reversal Protection Provided in the Card
Over Current Protection Provided in the Card
Short Circuit Protection Provided in the Card (recovers automatically)
Under Voltage < 4.5V
Over Voltage 5.4V to 5.6V
Efficiency at full load >80% Typ.
Ripple at full load <5mVrms
Spike at full load <50mV
Power Consumption 12W - 8 port, E1 to T1 converter configuration
29W - 64 port, E1 to T1 converter configuration
Temperature 0°C to 55°C
Humidity 95% RH (non-condensing)
Cooling Convection Cooling

About Us   |  Contact Us  |  Products  |  Whats New   |  Press  |  E-mail 

Please click here to read our Notices of Copyrights and Trademarks
© Valiant Communications Limited, 1997-2008. All rights reserved.

E-mail: Contact Us
Web Site: http://www.valiantcom.com