|
|
|
| TEST RESULTS : 34Mbps, E3 - OLTE
Jitter Input Acceptance and Output Test Results:
Tests Performed
- BIT RATE Measurement (System Trans Out):
- A) Frequency: 3436804 Hz.
B) Off Set: 4 Hz. (+0.1 PPM)
- Check of AIS Frequency (Rec. Out) 34.368 Mb/Sec. ± 20
PPM
- A) Frequency: 34367896 Hz.
B) Off Set: -105 Hz. (-3.0 PPM)
- OUTPUT JITTER at 34Mb/Sec.
- Electrical Output: (For 0, +20 PPM, -20PPM)
| PORT # 2 |
| FILTERS |
FOR 0 PPM |
FOR + 20 PPM |
FOR -20 PPM |
| OFF |
0.01 UI |
0.01 UI |
0.01 UI |
| LP |
0.03 UI |
0.03 UI |
0.03 UI |
| HP1 |
0.01 UI |
0.01 UI |
0.01 UI |
| HP2 |
0.01 UI |
0.01 UI |
0.01 UI |
| LP + HP1 |
0.01 UI |
0.03 UI |
0.03 UI |
| LP + HP2 |
0.02 UI |
0.02 UI |
0.01 UI |
4. INPUT JITTER TOLERENCE at 34Mb/Sec.
INPUT (For 0, +20 PPM, -20PPM)
| PORT # 1 |
FREQ.
(Hz.) |
0 PPM
(UI) |
+ 20 PPM
(UI) |
-20 PPM
(UI) |
Specification |
| 100 Hz. |
10 |
10 |
10 |
> 1.5 |
| 1 K Hz. |
10 |
9 |
10 |
> 1.5 |
| 10 K Hz. |
8.9 |
8.9 |
10 |
> 1.5 |
| 100 K Hz. |
2.5 |
2.3 |
2 |
0.15 |
| 200 K Hz. |
1 |
1 |
1 |
0.15 |
| 800 K Hz. |
0.3 |
0.32 |
0.35 |
0.15 |
| PORT # 2 |
FREQ.
(Hz.) |
0 PPM
(UI) |
+ 20 PPM
(UI) |
-20 PPM
(UI) |
Specification |
| 100 Hz. |
10 |
10 |
10 |
> 1.5 |
| 1 K Hz. |
10 |
8.9 |
10 |
> 1.5 |
| 10 K Hz. |
9.8 |
8.9 |
10 |
> 1.5 |
| 100 K Hz. |
2.2 |
2.0 |
2 |
0.15 |
| 200 K Hz. |
1 |
1 |
1 |
0.15 |
| 800 K Hz. |
0.31 |
0.38 |
0.31 |
0.15 |
|
- Technical Specification
|
- 34Mbps Optical Interface
|
| Type of
Transmitter |
Class I Laser
Powered by STM-1 grade Class I Laser - by Lucent
Technologies, Inc |
| Number |
1 (+1) with
optical redundancy option |
| Nominal Bit
Rate |
34368kbps |
| Transmit
wavelength (in nm) |
1310nm
(standard)
1550nm (optional) |
| Transmit output |
-12dBm (min at *EOL – End Of Life)
-8dBm (typical)
-5dBm (maximum)
(other inputs available on request) |
| Transmit
Spectral Width |
< 4nm |
| Receive
wavelength |
1310nm
(standard)
1550nm (optional) |
| Operating
wavelength range |
Transmitter:
1260nm - 1360nm
Receiver: 1100nm - 1600nm |
| Receiver
dynamic range |
£ 30dBm |
| Receiver
sensitivity |
-38dBm
(typical)
-36dBm (min) |
| Connectivity |
FC-PC
connectors |
| Random
Jitter |
See
table - test results |
| Data-dependant
Jitter |
See
table - test results |
| Power Supply: |
Input: -40VDC to
-60 VDC |
| Temperature: |
-10°C to 50°C |
| Dimensions: |
19 inch, DIN 2U
(width - 480 mm)
height, 90 mm
depth 260 mm
Stand Alone |
| Net Weight: |
4.20 Kgs. |
System
Management:
Windows 95 based System Management and Control system supplied with the system. |
Safety:
- Class I Laser
- Meets the optical safety requirements: G.958, IEC 825-1 and IEC 825-2.
- Auto Laser Shut Down in case of fiber break: Enabled / Disabled by user. |
| Valiant
Part Number: 234100-RK (Optional 1 + 1 Optical Redundancy) |
Product
Description:
E3, 34Mbps Optical Line Transmission Equipment (OLTE / OLTU) - 48 VDC input
Stand Alone - 19 inch Rack Mount Version |
Valiant's VCL, E3-OLTE is a 34Mbps Optical Line
Transmission Equipment which converts and transports a ITU-T G.703 compliant standard
electrical E3, 34Mbps signal into a G.823 and G.821 compliant optical signal for transport
over 1310nm optical fiber cable. The optical link, between two OLTE terminals is
established on one pair of optical fiber. One fiber link is used for Transmit and the
other fiber link is used for Receive.
A complete optical line transmission system comprises of two
OLTE terminals one at each end of the optical fiber cable.
Both the Local and the Remote terminals can be monitored and
controlled by a Windows based GUI (Graphical User Interface), from a single location.
TCP-IP option for remote access is also available,
throught Valiant's TCP/IP Remote Access Server for remote access and monitoring.
Valiant Communications Limited is also
manufactures other telecom transmission solutions including DCME, Multiplexers, E1 / T1
channel banks, E1 / T1 digital cross connect switch, voice compression equipment, VPN
solutions, PRI (Euro) ISDN , E2 (4E1) Optimux, E3 34Mbps multiplexer, E1 to T1 convertors
and other telecom transmission solutions.
Valiant has its international offices,
distributors / re-sellers and support offices in U.S.A., Canada, United Kingdom, Mexico,
Israel, Japan, Taiwan, Hong Kong, Korea, Indonesia, Thailand, New Zealand, Argentina,
Uruguay, Honduras, El-Salvador, Netherlands Antilles, South Africa, Saudi Arabia, Kuwait,
U.A.E., Jordan, Yemen, Romania and Bangladesh.
- For more details, please contact:
Sales Department:
Valiant Communications Limited
Address: 71/1, Shivaji Marg,
New Delhi - 110015, India
Phone: +91-11-41055601, 41055602, 41055603
Fax: +91-11-51055604, 25434300
E-mail: Contact Us
Web Site: http://www.valiantcom.com
Technical specifications are subject to change without
notice.
Lucent is a Trademark of Lucent Technologies Inc. of USA.
All brand names and trademarks are the property of their respective owners.
© Valiant Communications Limited, 1997-2005. All rights reserved. |
|
