 |
|
. |
|
|
 |
|
16 E1 with Gigabit Ethernet (Wire Speed)
Optical Multiplexer |
Description 16 E1 with Gigabit Ethernet (Wire Speed)
Optical Multiplexer is a unique Gigabit multi-service
optical fiber transport solution which transmits both Gigabit
Ethernet (Gigabit Wire Speed) data along with upto 16 E1 (TDM)
channels over an optical fiber link.
1+1 optical fiber redundancy is also available for minimizing
the possibility of transmission loss due to an optical link
failure.
The Gigabit (Wire-Speed) Ethernet traffic along with 16 E1's
are multiplexed into 1.25 Gbps optical link to provide a
compact, high performance, high throughput and cost effective
broadband network access solution.
Configuration, Maintenance and Management Interfaces
-
Serial Management Port - RS232
interface (COM Port)
-
TCP/IP - 10/100BaseT for remote
management over a LAN / TCP/IP network
-
SNMP V2 (MIB File provided with the
equipment)
-
Telnet - CLI (Command Line
Interface)
-
Windows XP and Windows 7 compatible
Graphical User Interface (GUI)
-
Network Management System (to
monitor multiple units from a single central location)
|
|
|
Features
-
1U height
(44mm), 19-Inch standard rack-mountable
chassis
-
Wire-Speed Gigabit Ethernet traffic
with 16 E1 data are transported simultaneously
-
1 Gbps data throughput for aggregate
Ethernet traffic
-
Available with Single 110V-220V AC and
/ or -48V DC power supply
-
Supports 110V-220V AC and -48V DC
redundant power supply
-
Support jumbo frame size (9000 bytes)
transmission
-
Supports 1+1 optical link protection
-
MSA compliant SFP (Small Form-Factor)
based design for improved and easy serviceability.
-
SFP based
design provides the flexibility to the customer to change service
distance and support different types of optical fiber
-
Supports Automatic Laser Shutdown (ALS)
option for added safety
-
Performance analysis of optical ports
Optical Transmission Failure, Loss of Optical Link, Loss of Frame
and Errors (E-3 / E-6)
-
Performance analysis of E1 ports Loss
of Signal and Code Violation
-
Performance Analysis of GigE port - All
Received Packets, All Received Bytes, Received Broadcasts, All
Transmitted Packets, All Transmitted Bytes, Transmitted
Broadcasts, Received Error Packets
-
Provides Engineering Order Wire (EOW)
-
Remote access and management. Supports
SNMP V2 monitoring and traps
-
Supports Telnet (CLI text commands) for
easy configuration
-
GUI for easy configuration
-
Network Management System for
monitoring multiple units from a single, central location
-
Remote Power Down detection (RPD)
alarm. Allows the local end to detect if the remote unit is
unavailable due to optical link failure or due to power down
-
Remote software upgradable
-
AC and DC power redundancy (-48V DC,
110-230V AC options available)
-
EMI/EMC compliance
-
Complies to electrostatic discharge immunity (ESD) IEC
61000-4-2 level 2
-
RoHS compliant.
Highlights
Gigabit (Wire Speed) data transmission
Gigabit multi-service fiber optic
transport solution - Transmits both E1s and Gigabit Ethernet data
over an optical fiber link / or over 1+1 redundant optical fiber
links for added protection against link failures
Compact, high performance, high
throughput and cost effective broadband network access solution
SFP based design for customer
convenience, flexibility to change services distance and
serviceability
Optical distance support for 15Kms,
40Kms, 80Kms, 120Kms, 150Kms and 260Kms
Supports remote power down detect
function
Complies to IEEE 802.3, IEEE 802.3u,
IEEE 802.ab, IEEE 802.3x recommendations
Supports auto-negotiation function, and
can work in 10M full/half duplex, 100M full/half duplex, 1000M
full duplex mode (1000M half duplex is not supported)
Ethernet Transmission media is Category
6 UTP, RJ-45 connector (electrical) for Gigabit Ethernet channel
with upto 1000Mb/s data rates
Ethernet Transmission media is optical
fiber pair, LC connector, (optical) for Gigabit Ethernet fiber
channel with up to 1000Mb/s bandwidth
Engineering Order Wire (EOW)
Supports Command Line Interface (CLI)
for configuration and management
Supports TELNET for remote
configuration and management
Supports SNMP V2
Network Management (NMS)
Supports multiple type of alarm
notifications
Supports E1 and optical loop back
configuration, etc.
Low power consumption (Less than 11W)
Provides E1's with 120 Ohms (RJ-45) or
E1's with 75 Ohms (BNC) connections
E1 G.703, G.703 channels support all
protocols sent over it, like SS7 signalling, PRI for PABX
interconnection
Support for Base Station backbone
development for CDMA, GSM, 3G and other applications where E1
G.703 channels and Gigabit Ethernet data are required to send over
the same fiber link
Powered by
grade Class I Laser.
Related Links
|
|
|
|
. |
|
|
|
. |
|
|
