|
|
 |
|
|
|
.
E1 Digital Microwave Radios for 5.8GHz un-licensed
frequency band
- Solution for 5.8GHz un-licensed frequency band
 Valiant offers its latest E1 Digital Microwave solution for wireless transmission
solution for 5.8GHz un-licensed frequency band.
Valiant's offers a rugged and a very reliable Wireless
Digital Microwave solution which may be used to transmit up to 4E1 or 8E1 channels (or a
combination of E1 channels plus an Ethernet Channel) up to a distance of 40 KM in a
"line-of-sight" installation.
Valiant's Digital Microwave Radio solution consists of a
1U, 19-Inch Rack-Mountable Indoor Unit (IDU) and a very compact, pole-mountable Out-Door
Unit (ODU).
The 1U, 19-Inch Rack-Mountable Indoor Unit (IDU) may be
powered from a nominal - 48V DC power input (acceptable DC voltage input range is - 40V DC
to - 60 V DC). |
|
|
|
|
|
The ODU (Out-Door Unit) is packaged in a weather-proof, rugged pole-mountable units which
is powered from the IDU (Indoor Unit) through it's single antenna cable.Valiant's Digital Microwave Radio solution is provided with advanced
internal diagnostics capabilities which enables it to offer reliable performance even
under the most difficult and harsh conditions. The equipment is also available
(optionally) in a 1+1 protected package.
Features:
- Available in the 5.8GHz (un-licensed frequency band)
- Scalable transmission capacities from 2Mbps (1 x E1) to upto
16 Mbps (8 x E1s)
- Offers 4xE1, 4xE1+ Ethernet, 8xE1 interfaces via flexible
plug-in modules
- Available in 1+1 protected, or 1+0 unprotected
configurations - "space" and "frequency" diversity
- User Programmable Output Power Level
- Software-selectable frequency, ungradable capacity
- Adaptive Reed-Solomon Forward Error Correction (FEC) to
ensure error-free transmission
- Automatic Transmit Power Control (ATPC)
- Integrated WEB server
- Comprehensive, integrated performance monitoring and logging
- Reliable Link performance
- High reliability
- SNMP
Technical Specifications:
General Specifications:
| Radio Type |
4E1 / 8E1 Digital Microwave Radio
5.8GHz for un-licensed frequency band |
| Frequency Source |
Synthesizer |
| System Configuration |
Non-Protected (1+0
1+1 hot standby system
Space and frequency diversity |
| RF Channel Selection |
IDU Controlled, or via NMS |
| Modulation |
QPSK |
| User Interface options |
E1 - 120 Ohms - Balanced (4E1,
8E1)
Ethernet -10/100BASE-T (RJ-45 Connector) |
| Unfaded BER |
10 -11 or better |
| Loopback Test Options |
Port Loopback, Frame Loopback,
Interface Loopback, Remote Line Loopback |
| Alarm Input |
4 x TTL Inputs |
| Relay Output |
5 x Form "C" Relays |
| MTBF |
180,000 Hours |
| Frequency Option (4E1) |
5.725 GHz to 5.850 GHz |
| Frequency Option (8E1) |
5.725 GHz to 5.875 GHz |
Transmit and Receive Power:
| Transmitter |
| Output Power |
20dBm |
| Frequency Stability |
± 5ppm |
| Tx Intermediate Frequency |
310 Mhz |
| Receiver |
| Noise Figure |
< 4.0 dB |
| Rx Intermediate Frequency |
70 Mhz |
| Overload |
-30 dBm |
Receiver threshold
(1x10-6 BER) |
QPSK Modulation - Receiver
threshold:
4xE1 - 87 dBm
8xE1 - 84 dBm |
Mechanical:
| Dimension |
Indoor Unit: 482mm x 44mm x 265mm
Outdoor Unit: 265mm x 265mm x110mm |
| Weight |
Indoor Unit: 3.5 kg
Outdoor Unit: 5.5 kg |
| Indoor Unit - Outdoor Unit Interconnection |
Single Cable, RG-8 Type, 50 Ohms
– Un-balanced
Recommended Cable: Times-Microwave LMR400 or Belden 9913
Maximum Distance: Up to 1000 Ft. (300 m)
Outdoor Unit Connector Type: "N" Male
Indoor Unit Connector Type: "TNC" Female |
Operating Conditions - Environmental:
| Temperature Range |
Operating Temperature Range:
Indoor Unit: -5~+500C
Outdoor Unit: -33~+650C |
| Relative Humidity |
Relative Humidity
(non-condensing):
Indoor Unit: 20%~90%
Outdoor Unit: 0%~100% |
Service Channels - Voice:
| Engineering Order Wire (EOW) |
Frequency Response: 300-3400 Hz
Impedance: 600 balanced
Interface RJ-11: RJ-11 |
Service Channels - Data:
| Digital Data Channel 1 |
0~9600bps, RS232C Serial
Interface: (RJ-45 Connector) |
| Digital Data Channel 2 |
0~9600bps, RS422 Interface Serial
Interface:
(RJ-45 Connector) |
Management Interfaces:
| NMS - Data Channel 1 |
Serial Interface -
9600bps, RS232C Interface (RJ-45 Connector) |
| NMS - Data Channel 2 |
Ethernet Interfaces -
10Mbps, 10BASE-T Interface (RJ-45 Connector) |
Power Supply:
| Input DC Voltage |
- 48V DC Volts
+/- 24V DC Volts (Optional) |
Power Consumption:
| Power Consumption |
Indoor Unit 10 Watts
Outdoor Unit 25 Watts |
|
|
About Us
| Contact Us | Products | Whats
New | Press | E-mail
Please
click here to read our Notices of Copyrights and Trademarks
© Valiant Communications Limited, 1997-2008. All rights
reserved. |
|
