.
Valiant Communications: AC to DC Converter - Autoranging voltage 85~132VAC, 170~264VAC, 47Hz - 63Hz
 
 
 
 
 
 
VCL-STM-1 / STM-4 / STM-16

DescriptionSTM-1, VCL100MC-1 (up to 63 E1 / DS3)

Valiant offers next generation STM-1 (optical and electrical), STM-4 and STM-16 SDH multiplexers to provide multiple services from E1 / T1 tributaries (software configurable as E1 or DS1), E3 / DS3 tributaries (software configurable as E3 or DS3),  10/100Base-T Ethernet, STM-1/4/16 and GigE interfaces.

The STM-1, VCL100MC-1 (upto 63 E1) is a compact, modular, and cost effective STM-1 SDH multiplexer equipment designed to manage bandwidth and provide E1 or fractional E1, voice and data access service over STM Networks. Also offered is STM-1/4/16 SDH ADM Multiplexer with the following interfaces:

  • E1
  • E3/DS3
  • STM-1 (S1.1, L1.1, L1.2)
  • STM-4 (S4.1, L4.1, L4.2)
  • STM-1 (S16.1, L16.1, L16.2)
  • 10/100Base-T Ethernet
  • GigE (1000 Mbps) Transport card
  • GigE (1000 Mbps) Switching card

 

Products

Other Products

Next Generation STM-1 / STM-4 / STM-16 SDH Multiplexers
STM-1 ADM Multiplexer STM-1 Add-Drop multiplexer (with upto 84 E1) E3, DS3, 10/100BaseT Ethernet interfaces. Data Sheet (PDF)
STM-4 SDH ADM Multiplexer STM-4 (upgradable to STM-16) Add-Drop Multiplexer with end-to-end provisioning for multiple service from E1s, E3, DS3s, STM-1e, STM-1o, 10/100Mbps Ethernet and GigE services. Data Sheet (PDF)
STM-16 SDH ADM Multiplexer STM-16 Add-Drop Multiplexer with 256E1, E3, DS3, STM-1e/1o, STM-4 and 10/100Mbps and GigE Ethernet interfaces at STM-16 rates. Full redundancy. Configurable to STM-1/STM-4. Upgragable to STM-16.

Tributary Interfaces

  • 28 x E1
  • 63 x E1
  • 3 x E3/DS3
  • 2 x STM-1 (S1.1, L1.1, L1.2)
  • 8 x 10/100Base-T Ethernet
  • 2 x GigE Transport card
  • 8 x 10/100 Base-T and 2 x GigE switching card
Data Sheet (PDF)
SDH / STM-1 Optical to SDH / STM-1 Electrical converters Provides a simple and cost-effective conversion between STM-1 optical interface to STM-1 electrical interface. Data Sheet (PDF)

The VCL100- STM-1/4/16 SDH Multiplexer is a modular, and cost effective STM-1/4 (upgradable to STM-16) SDH multiplexer equipment designed to manage bandwidth and voice & data access services over STM networks. The products are designed to support end-to-end provisioning and management of services across all segments of the optical network. It combines innovative optical networking software with the intelligence of SDH to deliver a flexible, cost-effective network solution.

The VCL100 STM-1/4 (upgradable to STM-16) provides flexibility to the customers in terms of expansion to support additional client interfaces by adding new modules in the field. It is also a scalable system that enables the customer to start with an STM-1 network and upgrade to STM-4 (upgradable to STM-16) as the traffic demand increases.

The distinguishing features of VCL100 STM-1/4 (upgradable to STM-16) over competing products are its unprecedented port density, scalability, redundancy and upgrade-ability with its software intelligence. The VCL100 STM-1/4/16 family of products can be managed through an integrated NMS that manages all STM equipment, providing customers with end-to-end provisioning from a single platform for multiple service types – from E1s, E3s, STM-1, STM-4, and 10/100Mbps Ethernet and GigE services.

STM-1 / STM-4, VCL100 STM-1/4 (up to 252 E1) Next generation access SDH multiplexers to provide multi-service solutions at the edge.

  • Supports for both TDM and data traffic services.
  • Flexible set of configurations to meet customer’s different service requirements.
  • Bringing intelligence to Optical Networking.
  • STM-1 STM-4 and STM-4 Muxes comes with:
  • Add/Drop and Terminal Multiplexer, Cross-Connect and Regenerator configurations
  • E1, E3, E4, STM-1e (electrical), STM-1o (optical) and 10/100 Mbps Ethernet tributaries

The VCL100MC-16 - STM-16 SDH Multiplexer is a cost-effective and compact STM-16 SDH multiplexer equipment designed to manage and derive services from the optical core to access. The product supports end-to-end provisioning and management of services across all segments of the optical network. The product is well suited for backbone and high-speed links. As traffic demand grows, the product ensures a smooth upgrade by allowing support for DWDM interfaces.

The VCL100MC-16 can be configured as a Terminal Multiplexer (TMUX), Add-Drop Multiplexer (ADM), or as a Regenerator in various configurations with E1, E3/DS3, STM-1e/1o, STM-4 and 10/100/1000 Mbps Ethernet tributary interfaces and trunk interfaces at STM-16 rates.

Tributary Interfaces

  • 28 x E1
  • 63 x E1
  • 3 x E3/DS3
  • 2 x STM-1 (S1.1, L1.1, L1.2)
  • 8 x 10/100Base-T Ethernet
  • 2 x GigE Transport card
  • 8 x 10/100 Base-T and 2 x GigE switching card

As transmission networks are being gradually dominated by data traffic, VCL100MC-16 provides 10/100 Base-T & GigE interfaces to carry inter-office data traffic from a corporate LAN, traffic from an ISP, DSL or cable networks.

Related Links

Other Products

.
Please click here to read our Notices of Copyrights and Trademarks
©
Valiant Communications Limited. 1997-2013. All rights reserved

   Products   l   What's New   l   About Us   l   Contact Us   l   E-mail

.