The VCL-MX-CPS, 1+1 Automatic Channel Protection Switching Equipment may be used with VCL-MX Version-6, E1 PDH Voice and Data Multiplexer to protect up to 8, 64Kbps and n*64Kbps data channels, or 64 FXS / FXO / Hot-Line channels, or 16 E&M channels, or a mix of the above at customer site / termination point and provide an alternate communication route to each voice and data channel between customer premises equipment and VCL-MX Version-6 voice and data multiplexer chassis.
In the event of the failure of the primary (main) voice or data channel, the VCL-MX-CPS automatically switches the customer premises voice and data equipment to a secondary (standby) voice and data interface.
The VCL-MX-CPS equipment is available in a 3U high chassis, which may be mounted in any DIN standard, 19-Inch rack.
This product allows the user to achieve 1+1 (protected) redundant voice and data interface routes between user's voice and data equipment and VCL-MX Version-6 E1 PDH Multiplexer.
Example: The user may deploy the VCL-MX-CPS, 1+1 Automatic Channel Protection Switching Equipment to provide an alternate communication route between the customer premises voice or data equipment and VCL-MX Version-6 Voice or Data interfaces. In the event of the failure of the primary voice or data interface, the channel is automatically switched to the alternate / standby voice or data interface of the VCL-MX Version-6 E1 PDH Multiplexer.
Application # 1
Application # 2
Channel Protection Chassis: Ordering Code VCL-MX-CPS-S
|Total number of card slots||10|
|Power Supply Card Slots||2 (1+1) for Redundancy|
|Channel Protection Card Slots||8|
Channel Protection Interface Card: Ordering Code VCL-MX-CPS-C
|Total number of protected channels per card||
|Total number of protected channels per chassis||
DC PowerSupply : Ordering Code VCL-MX-1510
|Input DC Voltage||-48V DC (nominal)|
|Range of Input||-36V to -72V DC|
|Output Voltage||5V filtered -48V (for terminal cards)|
|Full Load Current||4A at 48V DC|
|Input Voltage Reversal Protection||Provided in the Card|
|Over Current Protection||6A at 48V DC|
|Short Circuit Protection||Current limit 6A.
Recovers on removal of Short
|Efficiency at Full Load||>91%|
|Ripple at Full Load||<5mVrms|
|Spike at Full Load||<50mV|
|Operating Temperature||-200C to +600C|
|Maximum Operating Humidity||95% R.H., Non-Condensing|
|Maximum Operating Altitude||Up to 3,000 meters above sea level|
|Operation||Complies with ETS 300 019 Class 3.2|
|Storage Temperature||-400C to +700C|
|Storage||Complies with ETS 300 019 Class 1.2|
|Maximum Storage Humidity||98% R.H., Non-Condensing|
|Maximum Storage Altitude||Up to 3,000 meters above sea level|
|Transportation||Complies with ETS 300 019 Class 2.3|
|Weight||12 Kgs. (Approximately fully Loaded)|
Data Sheet (PDF)