Oil & Gas

Railways and Metro Network Communication solutionsValiant offer a wide range of communication solutions for Oil & Gas networks. Solutions include GPS synchronization solutions (nano second accurancy), IP/Ethernet backbone technologies, SCADA, Monitoring and Surveillance, Video & CCTV, Analog Voice FXO/FXS/E&M, Hotline, LAN, Emergency Alarm systems, VoIP services etc. Wide range of interafces offered include: IP/Ethernet, Gigabit Ethernet, E1, SDH, X.21/V.35, RS-232/V.24 (Synchronous / Asynchronous), N x 64 kbps Communication solutions for Oil & Gas networks includes PTP IEEE-1588v2 Synchronization solutions, GPS Primary Reference Clocks, NTP Servers, E1 PDH Multiplexers with low speed data (asynchronous and synchronous) for traffic control communications, 1+1 Protection Switching equipment for network redundancy.

Valiant offers complete Design, Manufacture, Installation Services for Oil & Gas communications and synchronization solutions.

  • Comprehensive Range of Products
  • Complete Communications and Synchronization Package from a single vendor
  • No interconnect or interoperability issues

Communication Products includes:

  • PDH Multiplexers: Voice and Data Multiplexers with 1+1 Control Card, E1 Card and Voice and Data Card level protection (1+1 Channel Level Protection @ 64Kbps).
  • SDH Multiplexers: STM-1, STM-4 and STM-16
  • Packet-Optical Multiplexes: May be used to Gigabit Ethernet as well as legacy voice and data channels from a single unified chassis.

Time and Frequency Synchronization Products include:

Valiant manufactured equipment is being currently being used by some of these prestigious reference customers:

  • ADMA, Abu Dhabi Oil
  • Brunei Shell Petroleum, Brunei
  • ENI Saipem
  • Petronas Cargili, Malaysia
  • Qatar Gas, Qatar
  • RAS Gas, Qatar
  • TECO / Peoples Gas, Tampa, Fl.

Oil & Gas Network communications equipment solutions includes PTP IEEE-1588v2 Synchronization, GPS Primary Reference Clocks, Sub-Master Clocks, NTP Servers, Time Display units, SCADA E1 PDH Multiplexers with low speed data (asynchronous and synchronous) for management and control, 1+1 Protection Switching equipment for critical network redundancy and Packet Optical Transport equipment with a wide range of legacy and modern digital interfaces.

VCL-SE, Synchronous Ethernet Carrier Equipment

  • Carrier Grade Transmission Equipment over Optical / Wireless Links
  • Uses IEEE-1588v2 PTP synch
  • Uses IEEE-1588v2 PTP synchronization technology
  • Provides time-of-day and frequency synchronization to a single central GPS source with 0.5 micro-second (< 500 nanosecond) accuracy.

Uplink Network Interfaces (Any 4 user selectable ports)

  • 4x10/100/1000BaseT / 4x1000Base SX/LX (use any 4 interfaces)
  • Less than 4ms latency on all TDM (E1) over IP transmission links.

User Side Interfaces

  • 8x10/100BaseT Ethernet Ports (4x10/100BaseT Ethernet Ports with PoE)
  • 8x 100BaseFX Optical Ethernet Ports (SFP)
  • 8x E1/T1 Interfaces
  • 1x IRIG-B outputs

E1 Drop-Insert PDH Voice And Data Multiplexers

  • Key Features:
  • 1+1 E1 Link Protection / E1 Port Redundancy
  • 1+1 Control Card Processor and Cross-Connect Redundancy
  • 1+1 Channel Level (DS-0 level) Redundancy
  • 1+1 Timing (Synchronization Clock) Redundancy. User selectable synchronization priority
  • 1+1, Power Supply Redundancy (Dual Power Inputs – allows the equipment to be powered from two separate sources)
  • Integrated C37.94 Teleprotection interface (ST / FC / SC Optical Connector options).

Voice Interfaces

  • FXO, FXS
  • E&M (2 Wire and 4 Wire)
  • FXS-FXS (Hot-line)
  • Ring Generator (75V RMS)
  • 18 x five-way / 30 x three-way Voice conferencing

Data Interfaces

  • Channelized E1 / Fractional E1 data
  • RS-232 asynchronous data
  • V.24 synchronous / asynchronous data
  • G.703, @ 64 Kbps, co-directional
  • V.35, V.36, X.21, V.11, RS530, RS449 synchronous
  • Relay I/O (Dry Contact)
  • IEEE C37.94 Teleprotection Interface
  • 8E1 plus 100Mbps Ethernet fiber optical transport interface

VCL-MX : Transmission over Optical Packet / Wireless

  • Gigabit Ethernet Voice & Data Optical Packet / Wireless Transport Multiplexer
    • Transmission over Optical Fiber or Ethernet Wireless Links
    • Delivers error free transmission of E1, 2-wire and 4-wire Voice, Synchronous and Asynchronous Data, Teleprotection and IRIG-B time over Ethernet / IP / MPLS or SDH networks with Stratum 1 or Stratum 3E level of accuracy.
    • Uses IEEE-1588v2 PTP synchronization technology to provide time-of-day and frequency synchronization to a single central GPS source with 0.5 micro-second (< 500 nanosecond) accuracy.
  • E1 PDH Drop-Insert (Add-Drop) Voice & Data Multiplexer industrial hardened design with C37.94 Teleprotection Interfaces

Uplink Network Interfaces (Any 4 user selectable ports)

  • 4x10/100/1000BaseT / 4x1000Base SX / LX (use any 4 interfaces)
  • Less than 4ms latency on all TDM (E1) over IP transmission links

User Side Interfaces

  • 4x10/100BaseT Ethernet Ports + 4x10/100BaseT PoE (Power over Ethernet)
  • 8x 100BaseFX Optical Ethernet Ports (SFP)
  • 8x E1/T1 Interfaces
  • 4x IRIG-B outputs

Voice Interfaces

  • FXO, FXS, E&M (2 Wire and 4 Wire), FXS-FXS (Hot-line), Ring Generator (75V)

Data Interfaces

  • Asynchronous: RS232 / RS485 / V.24 / V.11 / V.28
  • Synchronous: G.703 / V.35 / V.36 / X.21 / RS530 / RS449 / V.24 / V.11 / V.28, C37.94 Teleprotection

Features

  • Oil & Gas / SCADA / Smart-Grid Ready
  • Uses IEEE 1588v2 technology for time and frequency synchronization
  • May be synchronized to a GPS Receiver IEEE 1588v2 PTP Grandmaster Clock
  • Phase and Frequency synchronization on all nodes
  • May be used to distribute ‘Time-Of-Day’ to all nodes with 0.5us accuracy
  • Supports Point-to-point and Point-to-multipoint configurations
  • Add-Drop / Drop-Insert voice and data channels

Products include: