Solutions for Power, SCADA and Other Utilities

Railways and Metro Network Communication solutionsValiant Communications Limited is an ISO SO 9001:2008, ISO 14001:2004 and ISO 10002:2004 certified equipment telecom transmission equipment and solutions manufacturer with successful installations in over 100 countries.

Valiant's equipment is being currently being used by some of these prestigious reference customers who include ABB Norway, APTRANSCO (AP) India, Basin Electric Power Cooperative, BHEL India, Brazos Electric Power USA, Delhi Transco (NCR) India, EGAT Thailand, Electrica Transilvania Romania, Hanoi Power Vietnam, GETCO (Gujarat Energy Transmission Corporation Limited) India, Larsen & Toubro India, Nepal Electricity Authority, Power Grid Corporation of India, Siemens Indonesia, Siemens India, Siemens UAE, Sulaymaniyah Power Station Iraq, Tampa Electric Company USA, Turkish Electricity Company (TEIAS), Transelectrica Romania, VietNam Electricity (EVN) Vietnam, WAPA (Western Area Power) USA to name a few prestigious customers.

Valiant offer a wide range of Modern Railways and Metro Networks communications and synchronization solutions.

Communication Products includes:

Time and Frequency Synchronization Products include:

Industrial Grade Router and Firewall Equipment (Encryption and Firewall for SCADA, Smart Grid, Power Utilities):

Power Utility equipment and solutions includes PTP IEEE-1588v2 Synchronization solutions, GPS Primary Reference Clocks, Sub-Master Clocks, Time Display units, Multiplexers with low speed data (asynchronous and synchronous) for inter substation communications, 1+1 Protection Switching equipment for critical network redundancy and Packet Optical Transport equipment with a wide range of legacy and modern digital interfaces.

Application Diagrams

Valiant offers complete Design, Manufacture, Installation Services for Power Utility and other Utility networks.


VCL-GPS-2145,
GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP

GPS Primary Reference Clock and PTP IEEE-1588v2 Grandmaster Clock, NTP Server (IPv4 and IPv6). Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

Power Utilities and SCADAData Sheet (PDF)

VCL-GPS-2145-D,
1+1 Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP

1+1 Redundant GPS, Primary Reference Clock, IEEE-1588v2 PTP Grandmaster, NTP Server (IPv4 and IPv6). Provides IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

Power Utilities and SCADA Data Sheet (PDF)

VCL-2145-LC,
GPS Primary Reference Clock (PRC)

GPS Primary Reference Clock (PRC) provides 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits clock outputs with high stability OCXO Holdover Clock. Rubidium Clock option available.

Power Utilities and SCADAData Sheet (PDF)

VCL-GPS-2145,
GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP

GPS Primary Reference Clock and PTP IEEE-1588v2 Grandmaster Clock, NTP Server (IPv4 and IPv6). Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

Power Utilities and SCADA Data Sheet (PDF)

VCL-GPS-2145-D,
1+1 Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP

1+1 Redundant GPS, Primary Reference Clock, IEEE-1588v2 PTP Grandmaster, NTP Server (IPv4 and IPv6). Provides IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

Power Utilities and SCADA Data Sheet (PDF)

VCL-2145-SLV,
PTP IEEE-1588v2 Slave Clock

PTP Slave Clock (IEEE-1588v2) for ToD (Time-of-Day) and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available.

Power Utilities and SCADA Data Sheet (PDF)

VCL-2112-SLV-LC,
PTP IEEE-1588v2 Slave Clock

PTP Slave Clock (IEEE-1588v2) for ToD (Time-of-Day) and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available.

Power Utilities and SCADA Data Sheet (PDF)

VCL-MX-IP, Gigabit Ethernet Voice and Data Multiplexer

GPS Grandmaster and Primary Reference Clock, IEEE-1588v2 PTP Grandmaster, Primary Reference Clock, NTP Server (IPv4 and IPv6). Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

Power Utilities and SCADA Data Sheet (PDF)

VCL-MX Version 6 - 80 E1 Voice and Data Multiplexer

  • 160Mbps, 80 E1 fully non-blocking cross-connect at 64Kbps (DS-0) level (2480 DS-0 – any to any time-slot cross-connect)
  • Multi-service platform – may be used to provide a wide variety of voice and data services from single chassis
  • 1+1 E1 Link Protection / E1 Port Redundancy (8 E1's per card)
  • 1+1 Control Card Processor Redundancy
  • 1+1 Cross-Connect / TSI Redundancy
  • 1+1 Timing (Synchronization Clock) Redundancy. User selectable synchronization priority
  • 1+1 48V DC Power Supply Redundancy (Dual Power Input – allows the equipment to be powered from two separate sources
  • Up to 144 FXO or 144 FXS voice channels per unit
  • Up to 72 E&M 2-wire / 4-wire voice channels per unit
  • Any “mix” of data and voice channels in a single unit.
Power Utilities and SCADA Data Sheet (PDF)

E1 Multiplexer - Version 3 - Deluxe

Offers FXO, FXS, E&M (2 Wire/4 Wire), FXS-FXS (Hot-line), RS232, and G.703 @ 64 Kbps, Co-Directional, V.35, V.36, X.21, RS530, 10BaseT - Ethernet interfaces, Telnet, Remote Management, SNMP, NMS.

Power Utilities and SCADA Data Sheet (Deluxe)

E1 Multiplexer - Version 2 - Deluxe

Offers FXO, FXS, E&M (2 Wire/4 Wire), FXS-FXS (Hot-line), RS232 and G.703 @ 64 Kbps, Co-Directional interfaces, Telnet, Remote Management, SNMP, NMS.

Power Utilities and SCADA Data Sheet (Deluxe)

VCL-TP, Teleprotection Equipment (C37.94 Optical Version)

8 Command Teleprotection Terminal (8 Nos. Tx & Rx independent command inputs & outputs for providing interconnection with Power Protection Relays). C37.94 Optical Interface, Single Mode 1310nm / Multi-Mode 850nm / Multi-Mode 1310nm. Available power options: -24V DC, 48V DC, 110V DC, 250V DC.

Power Utilities and SCADA Data Sheet (PDF)

VCL-TP, Teleprotection Equipment (G.703 64Kbps co-directional Electrical Version)

8 Command Teleprotection Terminal (8 Nos. Tx & Rx independent command inputs & outputs for providing interconnection with Power Protection Relays) G.703 64Kbps, 4-Wire co-directional interface. Available power options: -24V DC, 48V DC, 110V DC, 250V DC.

Power Utilities and SCADA Data Sheet (PDF)

VCL-TP, Teleprotection Equipment With Trip Counter Display Panel

VCL-TP, Teleprotection Equipment is an extremely reliable and flexible product that is available with 1+1 Optical Link Redundancy (C37.94), 1+1 Power Supply and 8/16, Digital Trip Counter Display Panel with 8 user configurable External Relay Alarm output options.

Power Utilities and SCADA Data Sheet (PDF)

E1 Teleprotection Equipment

VCL-TP, E1 Teleprotection Equipment is an extremely rugged product has been designed to operate reliably even under the most demanding conditions and environment. The VCL-TP, Teleprotection Equipment offers up to 8, 2-way independent command channels which can be operated over an E1, 2.048Mbps, G.703 interface option for transmission over E1 links.

Power Utilities and SCADA Data Sheet (PDF)

VCL-RX, IEEE C37.94 Optical Repeater

VCL-RX, IEEE C37.94 Optical Repeater is an extremely reliable and flexible C37.94 transmission product that re-generates and re-times the C37.94 optical signals and removes any residual jitter and wander, thereby making it suitable for extending C37.94 signals over long optical fiber links.

Power Utilities and SCADA Data Sheet (PDF)

VCL-MX-IP, Gigabit Ethernet Voice and Data Multiplexer

GPS Grandmaster and Primary Reference Clock, IEEE-1588v2 PTP Grandmaster, Primary Reference Clock, NTP Server (IPv4 and IPv6). Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

Power Utilities and SCADA Data Sheet (PDF)

VCL-E1oP (2E1 Port IEEE-1588 Version)

VCL-E1oP' E1 over Packet (2 E1 Port IEEE-1588v2 Version) TDM over IP equipment supports transmission of up to 2 x E1 links over IP / Ethernet, MEF or MPLS networks and synchronization using IEEE-1588v2 protocol. The 'VCL-E1oP' E1 over Packet (2 E1 Port IEEE-1588 Version) TDM over IP equipment with IEEE-1588 protocol engine which provides a highly reliable clock recovery mechanism for extremely low jitter and wander control, even under variable network conditions.

Technical Specifications
Power Utilities and SCADA Data Sheet (PDF)

VCL-E1oP (8E1 Port IEEE-1588 Version)

VCL-E1oP' E1 over Packet (8 E1 Port IEEE-1588v2 Version) TDM over IP equipment supports transmission of up to 8 x E1 links over IP / Ethernet, MEF or MPLS networks and synchronization using IEEE-1588v2 protocol. The 'VCL-E1oP' E1 over Packet (8 E1 Port IEEE-1588 Version) TDM over IP equipment with IEEE-1588 protocol engine which provides a highly reliable clock recovery mechanism for extremely low jitter and wander control, even under variable network conditions.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-T1oP (2T1 Port IEEE-1588 Version)

'VCL-T1oP' T1 over Packet (2 T1 Port IEEE-1588v2 Version) TDM over IP equipment supports transmission of up to 2 x T1 links over IP / Ethernet, MEF or MPLS networks and synchronization using IEEE-1588v2 protocol. The 'VCL-T1oP' T1 over Packet (2 T1 Port IEEE-1588 Version) TDM over IP equipment with IEEE-1588 protocol engine which provides a highly reliable clock recovery mechanism for extremely low jitter and wander control, even under variable network conditions.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-T1oP (8T1 Port IEEE-1588 Version)

'VCL-T1oP' T1 over Packet (8 T1 Port IEEE-1588v2 Version) TDM over IP equipment supports transmission of up to 8 x T1 links over IP / Ethernet, MEF or MPLS networks and synchronization using IEEE-1588v2 protocol. The 'VCL-T1oP' T1 over Packet (8 T1 Port IEEE-1588 Version) TDM over IP equipment with IEEE-1588 protocol engine which provides a highly reliable clock recovery mechanism for extremely low jitter and wander control, even under variable network conditions.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-E1oP (2E1 Port FE)

'VCL-E1oP' E1 over Packet (2 E1 Port FE Version) TDM over IP equipment supports transmission of up to 2 x E1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-E1oP (2E1 Port GE)

'VCL-E1oP' E1 over Packet (2 E1 Port GE Version) TDM over IP equipment supports transmission of up to 2 x E1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-E1oP (4E1 Port FE)

'VCL-E1oP' E1 over Packet (4 E1 Port FE Version) TDM over IP equipment supports transmission of up to 4 x E1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-E1oP (8E1 Port GE)

'VCL-E1oP' E1 over Packet (8 E1 Port GE Version) TDM over IP equipment supports transmission of up to 8 x E1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-E1oP (16E1 Port GE)

'VCL-E1oP' E1 over Packet (16 E1 Port GE Version) TDM over IP equipment supports transmission of up to 16 x E1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-E1oP (32E1 Port GE)

VCL-E1oP' E1 over Packet, 32 E1 Port GE Version of our TDM over IP equipment supports transmission of up to 32 x E1 links over IP / Ethernet, MEF or MPLS networks. Multiple units of the 32 E1 Port GE Version equipment may be cascaded to support 32 E1 Ports aggregation at the Central Office / MSC (Mobile Switching Center).

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-T1oP (2T1 Port FE)

'VCL-T1oP' T1 over Packet (2 T1 Port FE Version) TDM over IP equipment supports transmission of up to 2 x T1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-T1oP (2T1 Port GE)

'VCL-T1oP' T1 over Packet (2 T1 Port GE Version) TDM over IP equipment supports transmission of up to 2 x T1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-T1oP (4T1 Port FE)

'VCL-T1oP' T1 over Packet (4 T1 Port FE Version) TDM over IP equipment supports transmission of up to 4 x T1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-T1oP (8T1 Port GE)

'VCL-T1oP' T1 over Packet (8 T1 Port GE Version) TDM over IP equipment supports transmission of up to 8 x T1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-T1oP (16T1 Port GE)

'VCL-T1oP' T1 over Packet (16 T1 Port GE Version) TDM over IP equipment supports transmission of up to 16 x T1 links over IP / Ethernet, MEF or MPLS networks.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-T1oP (32T1 Port GE)

'VCL-T1oP' T1 over Packet 32 T1 Port GE Version of our TDM over IP equipment supports transmission of up to 32 x T1 links over IP / Ethernet, MEF or MPLS networks. Multiple units of the 32 E1 Port GE Version equipment may be cascaded to support 32 T1 Ports aggregation at the Central Office / MSC (Mobile Switching Center).

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-DS3oP - DS3 / T3 over IP

'VCL-DS3oP', DS3 (T3) over IP / Ethernet equipment provides transmission of one, point-to-point, DS3 (T3) link over an IP / Ethernet, MEF or MPLS network. The 'VCL-DS3oP', DS3 (T3) over IP / Ethernet equipment is powered by a powerful PowerPC 400 MHz Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

VCL-E3oP - E3 over IP

'VCL-E3oP' (E3 over IP) equipment is used to transport a single E3 interface over an IP, MPLS or Ethernet network. The VCL-E3oP' (E3 over IP) equipment, is equipped with a powerful PowerPC 400 MHz Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Power Utilities and SCADAData Sheet (PDF)

Gigabit Ethernet over SDH (STM-4) Converter

Gigabit Ethernet over SDH (STM-4) Equipment is a compact and high-performance Gigabit Ethernet to STM-4 converter (with VLAN TAG function), which offers three Gigabit Ethernet interfaces (2 Electrical and 1 Optical Ethernet interfaces) and 2 x STM-4 interfaces.
Gigabit Ethernet over SDH (STM-4) – Available bandwidth on a single Ethernet port on an STM-4 link is 622Mbps (up to 1000Mbps on 2 x bonded STM-4 links).

Power Utilities and SCADAData Sheet (PDF)

Gigabit Ethernet over SDH (STM-1) Converters

Gigabit Ethernet over SDH (STM-1) provides a simple, cost effective and compact solution to convert 10/100/1000Base-T (Gigabit) data interface on the user side and transport Ethernet traffic over a STM-1 (155Mbps) SDH link and reconstruct the data back to ethernet frame format, at remote end. The converter is an effective method for converting and transporting 10/100/1000Base-T (Gigabit) ethernet data over an STM-1 (155Mbps) SDH link.
Gigabit Ethernet over SDH (STM-1) – Available bandwidth on a single Ethernet port on an STM-1 link is 137Mbps.

Power Utilities and SCADAData Sheet (PDF)

Ethernet over SDH (STM-1) Converters

Ethernet over SDH / STM-1 (EoS) provides a simple, cost effective and compact solution to convert 10/100BaseT data interface on the user side and transport Ethernet traffic over a STM-1 SDH link and reconstruct the data back to ethernet frame format, at remote end. The converter is an effective method for converting and transporting 10/100BaseT ethernet data over an STM-1 (SDH) link.
Ethernet over SDH (STM-1) – Available bandwidth on four Ethernet ports (4VCG) on an STM-1 link (126Mbps bandwidth aggregated on 4 Ethernet ports).

Power Utilities and SCADA Data Sheet (PDF)

Ethernet over DS3 converters

Valiant offers its Ethernet over DS3 Switch (Ethernet to DS3 Switch) packaged in a 1U, 19-inch rack-mountable chassis. Valiant Ethernet over DS3 Switch (Ethernet over DS3 Switch) provides a four 100BaseT Ethernet and 100Base-FX optical (optional) ethernet interfaces on the user side which may be used to transport Ethernet traffic over a DS3 link. Both ethernet interfaces may be used simultaneously. The Switch provides a simple and cost effective method to convert and transport ethernet data over an DS3 link.

Power Utilities and SCADAData Sheet (PDF)

Ethernet over E3 converters

Valiant offers its Ethernet to E3 converters (Ethernet over E3 Converters) packaged in a 19-inch rack-mountable chassis. Provides framed and un-framed E3 options. Valiant Ethernet to E3 converters (Ethernet over E3 Converters) provides a 100BaseT data interface on the user side which may be used to transport Ethernet traffic over a E3 link. The converter provides a simple and cost effective method to convert and transport 100BaseT ethernet data over a E3 link.

Power Utilities and SCADAData Sheet (PDF)

Ethernet over 8/16 E1 - ML-PPP

VCL-ETH-8E1-ML / VCL-ETH-16E1-ML Converter allows the user to send Ethernet data between two points or between multiple points (maximum 12 directions), over 8/16 E1 Links respectively. E1 Interfaces options are 75 Ohms/120 Ohms.

Power Utilities and SCADA Data Sheet (PDF)

Ethernet over 1 E1

Converts 1 x 10Base-T Ethernet (electrical) interface to 1 x G.703 E1 (or fractional E1) interface. (Standard Version).

Power Utilities and SCADAData Sheet (PDF)

4 Ethernet over E1

Converts and transports upto 4 x Ethernet links over 1 E1 link in a shared mode, or a discreet mode. (Standard Version).

Power Utilities and SCADAData Sheet (PDF)

4 Ethernet over T1

4 x Ethernet over T1 (IP over TDM) package in a 1U High, 19-inch rack-mountable chassis. It provides four 10/100BaseT (4 RJ-45) data interfaces on the user side which may be used to transport Ethernet traffic over a T1 link.

Power Utilities and SCADAData Sheet (PDF)

Ethernet over 4 E1

Converts 4 x 10Base-T Ethernet (electrical/optical) interface to 4 x E1s G.703 (or fractional E1s) interfaces. SNMP / CLI / GUI management. (Deluxe Version).

Power Utilities and SCADAData Sheet (PDF)

Ethernet over 8 E1

Converts 4 x 10Base-T Ethernet (electrical/optical) interface to 8 x E1s G.703 (or fractional E1s) interfaces. SNMP / CLI / GUI management. (Deluxe Version).

Power Utilities and SCADAData Sheet (PDF)

Ethernet over 16 E1

Converts 4 x 10Base-T Ethernet (electrical/optical) interface to 16 x E1s G.703 (or fractional E1s) interfaces. SNMP / CLI / GUI management. (Deluxe Version).

Power Utilities and SCADAData Sheet (PDF)

Ethernet over V.35

Converts 1 x 10Base-T Ethernet (electrical) interface to 1 x Nx64Kbps (N=1~32) interface.

Power Utilities and SCADAData Sheet (PDF)

SDH / STM-1 Optical to SDH / STM-1 Electrical converters

Provides a simple and cost-effective conversion between STM-1 optical interface to STM-1 electrical interface.

Power Utilities and SCADAData Sheet (PDF)

E1 (G.703) Fiber Optic Modem

E1 (G.703) Fiber Optic Modem provides the user the capability to establish communication between two E1 interfaces or between an E1/FE1 interface (or a "n"x64 V.35 interface) and over an optical fiber link.

Power Utilities and SCADAData Sheet (PDF)

V.35 Fiber Optic Modem

Provides the user the capability to establish communication between two V.35 interfaces or between an E1/FE1 interface and a "n"x64 V.35 interface over an optical fiber link.

Power Utilities and SCADAData Sheet (PDF)

4 E1 Optical Multiplexer plus Ethernet with SNMP

4 E1 Optical Multiplexer with 100Mbps Ethernet data transmission rate solution is a high performance optical line transmission equipment, combines 4, ITU-T G.703 compliant standard electrical E1s plus 100Mbps ethernet signal into an optical data stream for transport over fiber optic pairs.

Power Utilities and SCADAData Sheet (PDF)

8 E1 Optical Multiplexer plus Ethernet with SNMP

8 E1 Optical Multiplexer with 100Mbps Ethernet data transmission rate solution is a high performance optical line transmission equipment, combines 8, ITU-T G.703 compliant standard electrical E1s plus 100Mbps ethernet signal into an optical data stream for transport over fiber optic pairs.

Power Utilities and SCADAData Sheet (PDF)

16 E1 with Gigabit Ethernet (Wire Speed) Optical Multiplexer

High performance optical line transmission equipment combines 16 ITU-T G.703 compliant standard electrical E1, 2.048Mbps signals into an optical data stream for transport over fiber optic cables, plus 10/100Mbps Ethernet port. 850nm / 1310nm / 1550nm transmitter options available. 1+1 Optical Redundancy (Protection Switching) available.

Power Utilities and SCADAData Sheet (PDF)

Gigabit Optical Add-Drop Multiplexer

Gigabit Optical Add-Drop Multiplexer is a unique Gigabit multi-service optical fiber transport solution which transmits both Gigabit Ethernet (Gigabit Wire-Speed) data along with upto 16 E1 (TDM) channels over an optical fiber link. This product provides up to 4 x Gigabit interfaces with rate-limiting option on each port (with user selectable bandwidth allocation on each Gigabit port).

Power Utilities and SCADAData Sheet (PDF)

VCL-1400, STM-16 / 64 SDH Multiplexer

Valiant’s VCL-1400, STM-16 / 64 SDH Multiplexer is a compact POTP platform which is targeted for deployment in the edge and access part of a transport network. It can be configured both as a TDM MSPP as well as a Packet Switch. It supports both TDM and Ethernet as Line Interfaces. It offers full redundancy and comes with an expansion chassis for deployment in high drop locations. STM-16/64 SDH Multiplexer (upto 60G) offers TDM MSPP and Packet Switch support. Supports TDM and Ethernet as Line Interfaces. It offers full redundancy and comes with an expansion chassis.

Power Utilities and SCADAData Sheet (PDF)

STM-1 ADM Multiplexer

STM-1 Add-Drop multiplexer (with upto 84 E1) E3, DS3, 10/100BaseT Ethernet interfaces.

Power Utilities and SCADAData Sheet (PDF)

STM-1, 63 E1 (Optical / Electrical) Add-Drop SDH Multiplexer

Valiant's offers STM-1 63 E1 (Optical / Electrical), Add-Drop SDH Multiplexer unit is a modular platform unit with two 155.52Mbps optical / electrical interfaces, which may be used in a point-to-point, chain or ring application to provide an ultra-compact, cost effective and flexible multi-service platform.

Power Utilities and SCADAData Sheet (PDF)

STM-1 (Optical / Electrical) Add-Drop Multiplexer (with upto 16 E1 & 4 Ethernet) SDH Equipment

Valiant offers STM-1 (Optical / Electrical), E1 and Ethernet Multi-Service SDH Transmission Unit is a modular platform unit with two 155.52Mbps optical / electrical interfaces, which may be used in a point-to-point, chain or ring application to provide an ultra-compact, cost effective and flexible multi-service platform.

Power Utilities and SCADAData Sheet (PDF)

STM-1/4 SDH Multiplexer, GigE-SDH Aggregator

VCL1043-STM-1/4 SDH Multiplexer and GigE-SDH Aggregator’ is the compact Multi-Service Access Platform (MSAP) that offers Gigabit (Optical and Electrical ports), Ethernet (FE), STM-1, STM-4 and E1 aggregation functions. The Gigabit and SDH uplink (network side) interfaces can provide simultaneous services.

Power Utilities and SCADAData Sheet (PDF)

STM-4 SDH ADM Multiplexer

STM-4 (upgradable to STM-16) Add-Drop Multiplexer with end-to-end provisioning for multiple service from E1s, E3, DS3s, STM-1e, STM-1o, 10/100Mbps Ethernet and GigE services.

Power Utilities and SCADAData Sheet (PDF)

STM-16 SDH ADM Multiplexer

STM-16 Add-Drop Multiplexer with 256E1, E3, DS3, STM-1e/1o, STM-4 and 10/100Mbps and GigE Ethernet interfaces at STM-16 rates. Full redundancy. Configurable to STM-1/STM-4. Upgragable to STM-16.
Tributary Interfaces

  • 28 x E1
  • 63 x E1
  • 3 x E3/DS3
  • 2 x STM-1 (S1.1, L1.1, L1.2)
  • 8 x 10/100Base-T Ethernet
  • 2 x GigE Transport card
  • 8 x 10/100 Base-T and 2 x GigE switching card

Power Utilities and SCADAData Sheet (PDF)

SDH / STM-1 Optical to SDH / STM-1 Electrical converters

Provides a simple and cost-effective conversion between STM-1 optical interface to STM-1 electrical interface.

Power Utilities and SCADAData Sheet (PDF)

E1 (G.703) Fiber Optic Modem

E1 (G.703) Fiber Optic Modem provides the user the capability to establish communication between two E1 interfaces or between an E1/FE1 interface (or a "n"x64 V.35 interface) and over an optical fiber link.

Power Utilities and SCADAData Sheet (PDF)

V.35 Fiber Optic Modem

Provides the user the capability to establish communication between two V.35 interfaces or between an E1/FE1 interface and a "n"x64 V.35 interface over an optical fiber link.

Power Utilities and SCADAData Sheet (PDF)

4 E1 Optical Multiplexer plus Ethernet with SNMP

4 E1 Optical Multiplexer with 100Mbps Ethernet data transmission rate solution is a high performance optical line transmission equipment, combines 4, ITU-T G.703 compliant standard electrical E1s plus 100Mbps ethernet signal into an optical data stream for transport over fiber optic pairs.

Power Utilities and SCADAData Sheet (PDF)

8 E1 Optical Multiplexer plus Ethernet with SNMP

8 E1 Optical Multiplexer with 100Mbps Ethernet data transmission rate solution is a high performance optical line transmission equipment, combines 8, ITU-T G.703 compliant standard electrical E1s plus 100Mbps ethernet signal into an optical data stream for transport over fiber optic pairs.

Power Utilities and SCADAData Sheet (PDF)

16 E1 with Gigabit Ethernet (Wire Speed) Optical Multiplexer

High performance optical line transmission equipment combines 16 ITU-T G.703 compliant standard electrical E1, 2.048Mbps signals into an optical data stream for transport over fiber optic cables, plus 10/100Mbps Ethernet port. 850nm / 1310nm / 1550nm transmitter options available. 1+1 Optical Redundancy (Protection Switching) available.

Power Utilities and SCADAData Sheet (PDF)

Gigabit Optical Add-Drop Multiplexer

Gigabit Optical Add-Drop Multiplexer is a unique Gigabit multi-service optical fiber transport solution which transmits both Gigabit Ethernet (Gigabit Wire-Speed) data along with upto 16 E1 (TDM) channels over an optical fiber link. This product provides up to 4 x Gigabit interfaces with rate-limiting option on each port (with user selectable bandwidth allocation on each Gigabit port).

Power Utilities and SCADAData Sheet (PDF)

VCL-MX-XW, Industrial Grade Ethernet Switch IEC 61850-3 (Sub-Station Hardened)

VCL-MX-XW, Industrial Grade Ethernet, IEC 61850-3 complied Sub-Station Hardened Switch, is a flexible Ethernet Switch. 1U high, 19-inch rack-mountable shelf. No external fans or forced air cooling. IEC 61850-3 complied switch offers a wide choice of 1+1 redundant power supply options which include 24VDC, -48VDC, 110-125VDC, 110VAC and 240VAC.

Power Utilities and SCADAData Sheet (PDF)

Industrial Grade Router and Firewall Equipment

Valiant’s Enigmätron-FW is a firewall device with extremely advanced firewall features that may be installed to secure critical infrastructure such as Sub-Stations, Smart Grid Distribution Systems, Airport and Railway IT Networks as well as Financial Infrastructure such as Banks and Payment Processing Gateways. The Enigmätron-FW may also be installed in centrally managed networks consisting of multiple branch offices and edge locations to provide secure communications between ATMs, Point-Of-Sale Terminals and their corresponding back-end Central Servers.

Power Utilities and SCADA Data Sheet (PDF)

Industrial Grade Encryption and Firewall Equipment

Valiant’s Enigmätron is a high-security data encryption device that provides data encryption, including Ethernet frame encryption for Layer 2 networks, IP packet encryption for Layer 3 networks, and Layer 4 data payload encryption for IP and MPLS networks. The Enigmätron offers full-duplex encryption at speeds up to 12 MBits/s @ AES-256 algorithm, using TLS and SHA-1 for secure communication authentication.

Power Utilities and SCADA Data Sheet (PDF)

VCL-MX Version 6 - DXC 80xE1 Digital Access Cross Connect Switch

The VCL-MX Version 6 DXC - 80 E1, 160Mbps Digital Access Cross Connect is a modular switch which may be scaled from 8 E1 Ports to up to 80 E1 Ports. The VCL-MX Version 6, E1 DACS (E1 DXC) offers full cross-connect functionality to cross-connect between 64Kbps time-slots (DS-0s), "n"x64Kbps consecutive DS-0s and Fractional E1 channels to full E1 channels.

Power Utilities and SCADAData Sheet (PDF)

VCL-MX Version 6 - DXC 80xT1 Digital Access Cross Connect Switch

The VCL-MX Version 6 DXC 80 T1, 120Mbps Digital Access Cross Connect Switch, is a modular switch that may be scaled from 8 T1 Ports to up to 80 T1 Ports. The VCL-MX Version 6, T1 DACS (T1 DXC) offers full cross-connect functionality to cross-connect between 64Kbps time-slots (DS-0s), “n"x64 Kbps consecutive DS-0s and Fractional T1 channels to full T1 channels.

Power Utilities and SCADAData Sheet (PDF)